Advancer – 21-inch Full Shelf

Description

21-inch x

21-inch x 5-16-inch Full 10-Sided Advancer Kiln Shelf

For 10 sided

kilns with 2.5-inch walls.

Max temperature is 2600 degrees.

This is a special-order item. 
Shipping and packaging cost will be determined by the manufacturer at time of shipping.

Please allow at least, 6-8 weeks for delivery.

We will obtain a shipping quote for you, before shipping.

Advancer

Kiln Shelves are available in 8, 10 and 12-sided shapes to fit in most top

loading electric kilns (full and half) and are the only silicon carbide

shelves tested and recommended for use in resistance coil element kilns.  At only 5/16-inch thick, these shelves allow

for significantly more stacking space when compared to conventional 5/8-inch

and 1-inch-thick cordierite kiln shelves.

At less than

half the weight of conventional shelves, Advancer kiln shelves are far easier

to handle and lift in and out of the kiln with less stress to your hands and

back.

Do I need

to kiln wash my Advancer Kiln Shelves.

We generally

recommend using a suitable high alumina wash on our kiln shelves.

Particularly in studio or classroom settings where multiple users are present

Due to the

extremely low porosity of Advancer (less than1%) vs. conventional silicon

carbide (18% typical) and cordierite (30% typical).  It is true that there is much less of a

tendency for glaze to penetrate into or stick onto the Advancer surface.  Nevertheless, it is still possible for glaze

to react with the protective oxide glass surface of our Kiln shelves. Especially

at higher temperatures, and bond onto the Advancer surface.  Glaze drips are usually easily removed without

grinding because extremely low porosity of Advancer.  ON the other hand, glazes that volatilize at

temperature, leaving a fine mist of glaze on the shelf may require light grinding

or sanding for complete removal.