Centrifugal Pump Complete

Description

Slip-O-Matic ™ Centrifugal Pumps

This is the best pump design in the industry! There are no bearings or seals exposed to the slip, and it comes with a full two-year warranty. We use this pump with several of our machines, including our T60, T100, BP24 and BP30. 

The drive assembly of the Slip-O-Matic™ pump is what we refer to as the bearing assembly and it has no bearings or moving seals exposed to the liquid. We use this unique assembly to drive several different types of pumping systems. The original unit was a centrifugal design with a housing and impeller. A four-leg tower is used to suspend the housing, and the impeller is fastened to the shaft. 

Regardless of the shaft size used, the hole in the top of the housing is slightly larger and no bearing or seal is used at this point. As a result, the pump can be run either in or out of the liquid with no wear or damage to the system. While this pump is not cheap to build, there is nothing available that compares to its quality and durability. 

Also, since the pump is actually suspended in the slip, the rotating drive assembly creates mixing action in the tank. And by building different sizes of the same design, the pump can be made to meet the volume needs of various requirements and situations.