FireBox-86LT

Description

KM Glaze Tech – 240 volt Skutt Electronic Kiln

In-Stock

Chamber Size:  
Approximately 14.5 in. x 14.5 in. opening and 9 in. high: 1.1 cubic feet

The
Perfect Cone 10 Test Kiln

Most high
fire test kilns on the market are either too small or underpowered because they
are trying to run on 120V instead of 240V. With a little extra wiring you can
have a test kiln that truly fits your needs.

Brand New Controller

The Glaze-Tech now has a brand new controller that
allows you to fire Glass and Ceramics. It even has built in programs for
Precious Metal Clay. The perfect controller for any of your testing or other
small firing needs. Here is what you get:

·     
Glass Fire
Mode allows you to write a program
simply by choosing your technique and the speed. It’s that easy!

·     
Cone Fire
Mode allows you to fire Ceramics simply
by entering the Cone Value, Firing Speed and Hold Time.

·     
PMC Mode is even easier. All you enter is the type of
Metal Clay you are using and press start.

·     
Write your own firing programs with up to
8 Segments using Ramp and
Hold. Now you can store up to 5 programs.

·     
Adjust temperatures or hold times while
the kiln is firing using Add Time or Add Temp or simply select Anneal
Now to set your project and begin
annealing it.

The Right Size, the Right Power, and the Right
Control

When you are testing glazes, you want to
mimic the real world which means you need a kiln that can perform like your big
kiln. It needs to be wide enough to test multiple samples, tall enough to test
glazes on a vertical surface, powerful enough to match the firing profiles you
will use in real life and have the control to match those profiles on the
heating and cooling side of the profile. The Glaze-Tech was
designed to do exactly those things.